From 1st July 2013 the Construction Products Regulations 2011 (CPR) include a requirement that all products manufactured to a harmonised European Standard carry a CE mark and an accompanying Declaration of Performance (DOP).
Ilam Stone Ltd products comply with the standards set out to the more stringent specifications of BS1217:2008 but this is not yet a harmonised European Standard.
Products that do meet the harmonised European Standard at the moment are for BS EN 771-5:2011 Manufactured Stone Masonry Units (i.e. those with maximum dimension less that 650mm and that do not contain fixings or reinforcement) and will carry a CE mark and associated DoP.
The CE Mark provides proof of “fitness for purpose”and by affixing the CE mark Ilam Stone show that the construction product will enable the finished construction works to comply with the Construction Products Regulation requirements (i.e. The Basic Works Requirements) of:
- Mechanical resistance and stability
- Safety in case of fire
- Hygiene, health and environment
- Safety & accessibility in use
- Protection against noise
- Energy economy and heat retention
- Sustainable use of natural resources
Definition and objectives
The Declaration of Performance is the key concept in the Construction Products Regulation.
The Declaration of Performance serves to deliver the information about the essential characteristics of the product that we supply.
To meet the requirements of the relevant standards Ilam Stone carry out specific procedures specified in the directive, including (but not limited to) the following:
Factory Product Control in accordance with BS EN 771-5:2011
Maintenance of Technical files in accordance with BS EN 771-5:2011 of supporting documentation (e.g. Product Description, test reports, Declaration of Performance, etc.)
In-house performance tests
Product Testing independently undertaken by accredited third parties
Full and individual descriptions of the products are listed on the delivery ticket and further information for the harmonised European Standard can be found by following the links at the bottom of this page.
We the manufacturer, by drawing up a Declaration of Performance, assume the responsibility for the conformity of the construction product with the declared performance, and believe by the CE mark issued we comply with the legislation. A copy of the Declaration of Performance of each product that is made available on the market shall be supplied either by paper form or on this website.
Products with CE Marking
|CE Reference Code
|Product Group Description
|Manufactured Stone Masonry Unit
|CE Mark Declaration of Performance